In this study, carbon screen-printed electrodes (SPEs) modified with gold nanoparticles (AuNPs), were prepared for label-free detection of Escherichia coli(E. coli) O157. AuNPs were synthesized by an electrochemical method and then modified on the carbon SPEs to improve the stability and effectiveness of the biosensor. Anti-E. coli O157 antibody was immobilized on the modified SPEs via -NHS cross-linking. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were selected to investigate electrochemical properties of modified carbon SPEs in a 5.0 mM K3[Fe(CN)6]/ K4[Fe(CN)6] added with 0.1 M KCl as well as to detect E. coli O157 bacteria. Results showed that the carbon SPEs were successfully modified with AuNPs of 18.0 ± 1.6 nm. The electrochemical signal of modified SPEs was stable after CV cycles, and the charge transfer resistance (Rct) decreased approximately to half of its initial value. Importantly, electrochemical biosensors based on AuNPs-modified carbon SPEs could detect E. coli O157 in the range of 10–106 CFU/mL without labels. The limit of detection was found at 15 CFU/mL with a signal-to-noise ratio of 3:1, and the time of detection was about 30 min. The success of as-prepared biosensor could open a strategy of portable diagnostics for label-free and quick detection of bacterial pathogens causing food-borne diseases, hospital-acquired infections as well as the emerging and re-emerging infectious diseases.
Quang Khue, V.; Quang Huy, T.; Ngoc Phan, V.; Tuan-Le, A.; Thi Thanh Le, D.; Tonezzer, M.; Thi Hong Hanh, N. (2021). A label-free electrochemical biosensor based on screen-printed electrodes modified with gold nanoparticles for quick detection of bacterial pathogens. MATERIALS TODAY COMMUNICATIONS, 26: 101726. doi: 10.1016/j.mtcomm.2020.101726 handle: http://hdl.handle.net/10449/73979
A label-free electrochemical biosensor based on screen-printed electrodes modified with gold nanoparticles for quick detection of bacterial pathogens
Matteo, Tonezzer;
2021-01-01
Abstract
In this study, carbon screen-printed electrodes (SPEs) modified with gold nanoparticles (AuNPs), were prepared for label-free detection of Escherichia coli(E. coli) O157. AuNPs were synthesized by an electrochemical method and then modified on the carbon SPEs to improve the stability and effectiveness of the biosensor. Anti-E. coli O157 antibody was immobilized on the modified SPEs via -NHS cross-linking. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were selected to investigate electrochemical properties of modified carbon SPEs in a 5.0 mM K3[Fe(CN)6]/ K4[Fe(CN)6] added with 0.1 M KCl as well as to detect E. coli O157 bacteria. Results showed that the carbon SPEs were successfully modified with AuNPs of 18.0 ± 1.6 nm. The electrochemical signal of modified SPEs was stable after CV cycles, and the charge transfer resistance (Rct) decreased approximately to half of its initial value. Importantly, electrochemical biosensors based on AuNPs-modified carbon SPEs could detect E. coli O157 in the range of 10–106 CFU/mL without labels. The limit of detection was found at 15 CFU/mL with a signal-to-noise ratio of 3:1, and the time of detection was about 30 min. The success of as-prepared biosensor could open a strategy of portable diagnostics for label-free and quick detection of bacterial pathogens causing food-borne diseases, hospital-acquired infections as well as the emerging and re-emerging infectious diseases.File | Dimensione | Formato | |
---|---|---|---|
2021 MC Tonezzer.pdf
solo utenti autorizzati
Tipologia:
Versione editoriale (Publisher’s layout)
Licenza:
Tutti i diritti riservati (All rights reserved)
Dimensione
4.24 MB
Formato
Adobe PDF
|
4.24 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.